Wood burner guide

The best way to light a fire: top-down

Forget screwing up newspaper and hoping for the best. This is the method I use and recommend to every customer — kindling stacked on top of the log, so the fire burns downwards. Less smoke, no relighting, works first time. — Jeremy, HETAS registered sweep

Quick answer: put the log at the bottom, build a loose kindling stack on top, light it, and leave the door ajar with the vents fully open. The fire lights itself from the top down.

Watch the top-down method in action — from first flame to a roaring fire in under 30 seconds.

Step by step

  1. 1

    Open the air controls fully

    Both the primary (bottom) and secondary (airwash) vents wide open. A new fire is hungry for oxygen.

  2. 2

    Lay a log at the bottom

    One or two dry logs across the grate. This is the fuel the kindling will light from above.

  3. 3

    Build a kindling stack on top

    Criss-cross dry kindling loosely, Jenga-style, on top of the log. Gaps are good — air needs to move through the stack.

  4. 4

    Add a natural firelighter

    Tuck one into the middle of the stack. Avoid newspaper screwed tight — it smothers rather than lights.

  5. 5

    Light it and leave the door ajar

    The flame catches the kindling, which drips embers down onto the log. The flue warms and the draw builds.

  6. 6

    Close the door once it is roaring

    Shut the door, keep the vents open, and let it burn hot for 15–20 minutes before adding more wood or turning the air down.

Why top-down beats the old way

Dry wood matters

Even the best technique fails with wet wood. Only burn wood under 20% moisture — look for the Ready to Burn logo. See our best wood for log burners guide, and once it is lit, keep it in the best-burn temperature zone.

Common questions

What is the best way to light a wood burner?

The top-down method: place a log or two at the bottom, build a loose stack of kindling on top, and put a natural firelighter in the middle. Light it, leave the door slightly ajar and the air controls fully open, and the fire burns down through the stack.

Why light a fire from the top instead of the bottom?

A top-down fire warms the flue faster, so the draw establishes quickly and you get far less smoke spilling into the room. The kindling lights the logs beneath it, so you rarely need to relight or fiddle with it.

Should I leave the stove door open when lighting?

Yes — while the fire catches, leave the door slightly ajar with the air controls fully open. Once the kindling is roaring, close the door and let the airwash take over. Never leave the stove unattended with the door open.

Why does my fire keep going out?

Usually the wood is too damp, the pieces are too big too soon, or there is not enough air. Use dry kindling and wood under 20% moisture, build a loose stack so air can move, and keep the vents fully open until the fire is well established.

Smoky fire that won't behave?

It might be your flue, not your technique. Call or WhatsApp 07429 863950, or book online.

Book a sweep